| NBR Property | Typical Performance |
|---|---|
| Hardness | Approximately 30–95 Shore A |
| Tensile Strength | Approximately 10–25 MPa |
| Elongation at Break | Approximately 200–600% |
| Operating Temperature | Approximately −30°C to +100°C, depending on the material composition. |
An injection mold lifter releases plastic parts that have internal undercuts. Picture a TV bezel
Every molding cycle ends with a short push. The mold opens, and the injection mold
Mold alignment gets less attention than cavity steel or cooling layout, yet it shapes part
Injection mold texture plays an important role in the appearance, feel, and functionality of injection
Soft tooling vs. hard tooling is the first decision in most injection molding projects. The
Mold polishing determines how your plastic parts look, feel, and release from the tool. A